Updated the version number

Installer/setup.iss

@@ -1,7 +1,7 @@
 #define use_dotnetfx46
 
 #define MyAppName "SmartHDD"
-#define MyAppVersion "1.0.0.0"
+#define MyAppVersion "1.0.0.1"
 #define MyAppPublisher "DoogeJ"
 #define MyAppURL "https://github.com/DoogeJ/SmartHDD"
 #define MyAppExeName "SmartHDD.exe"
@@ -24,6 +24,8 @@ OutputBaseFilename=Install_{#MyAppName}_{#MyAppVersion}
 SetupIconFile=..\Visualpharm-Hardware-Hard-disk.ico
 Compression=lzma
 SolidCompression=yes
+UsePreviousGroup=no
+UsePreviousAppDir=no
 
 ; we will need administrator privileges to copy to program files and / or install prerequirements
 PrivilegesRequired=admin

README.md

@@ -14,6 +14,12 @@ Modifications by me:
 ## License / Copyright:
 Please see the '**LICENSE**' file.
 
+# Installing
+Get the latest release here: [https://github.com/DoogeJ/SmartHDD/releases](https://github.com/DoogeJ/SmartHDD/releases).
+
+## Reporting bugs or feature requests
+Please use the GitHub issue-system for bugs or feature requests: [https://github.com/DoogeJ/SmartHDD/issues](https://github.com/DoogeJ/SmartHDD/issues).
+
 ## Note by the original author:
 > Tested against Crystal Disk Info 5.3.1 and HD Tune Pro 3.5 on 15 Feb 2013.  
 > Findings; I do not trust the individual smart register "OK" status reported back frm the drives.  
@@ -29,8 +35,10 @@ This application was written using Visual Studio 2015 and .NET Framework 4.5.2 o
 It will most likely build fine on different configurations, but might require some modifications.
 
 ## Updating the version number
-The version number is stored in two locations:
+The version number is stored in four locations:
 * In the projects assembly info file: **'SmartHDD\Properties\AssemblyInfo.cs'**
+* In the program header: **'SmartHDD\Program.cs'**
+* In the projects C# project file: **'SmartHDD\SmartHDD.csproj'**
 * In the installer setup.iss file (only used for the installer): **'Installer\setup.iss'**
 
 ## Building the installer
@@ -45,4 +53,4 @@ To build the installer:
 * Make sure the project is compiled and there is a working executable named **'SmartHDD.exe'** in the **'SmartHDD\bin\Release'**-folder 
 * Open **'Installer\setup.iss'** in the [Inno Setup Compiler](http://www.jrsoftware.org/isinfo.php) 
 * Hit *Build* -> *Compile* (Ctrl+F9)
-* Done, the installer should be in the **'Installer\bin'**-folder
+* Done, the installer should be in the **'Installer\bin'**-folder

SmartHDD/.gitignore

@@ -0,0 +1 @@
+*.csproj.user

SmartHDD/Program.cs

@@ -330,7 +330,7 @@ namespace SmartHDD
                 }
 
                 WriteFullLine("┌──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐");
-                WriteFullLine("│ SmartHDD by DoogeJ - https://github.com/DoogeJ/SmartHDD  - (c) 2016 Jaap-Willem Dooge, 2013 Llewellyn Kruger                             version 1.0.0.0 │");
+                WriteFullLine("│ SmartHDD by DoogeJ - https://github.com/DoogeJ/SmartHDD  - (c) 2016 Jaap-Willem Dooge, 2013 Llewellyn Kruger                             version 1.0.0.1 │");
                 WriteFullLine("└──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘");
                 Console.WriteLine();
 

SmartHDD/Properties/AssemblyInfo.cs

@@ -32,5 +32,5 @@ using System.Runtime.InteropServices;
 // You can specify all the values or you can default the Build and Revision Numbers 
 // by using the '*' as shown below:
 // [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyVersion("1.0.0.1")]
-[assembly: AssemblyFileVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.1")]

SmartHDD/SmartHDD.csproj

@@ -12,6 +12,21 @@
     <TargetFrameworkVersion>v4.5.2</TargetFrameworkVersion>
     <FileAlignment>512</FileAlignment>
     <AutoGenerateBindingRedirects>true</AutoGenerateBindingRedirects>
+    <PublishUrl>publish\</PublishUrl>
+    <Install>true</Install>
+    <InstallFrom>Disk</InstallFrom>
+    <UpdateEnabled>false</UpdateEnabled>
+    <UpdateMode>Foreground</UpdateMode>
+    <UpdateInterval>7</UpdateInterval>
+    <UpdateIntervalUnits>Days</UpdateIntervalUnits>
+    <UpdatePeriodically>false</UpdatePeriodically>
+    <UpdateRequired>false</UpdateRequired>
+    <MapFileExtensions>true</MapFileExtensions>
+    <ApplicationRevision>1</ApplicationRevision>
+    <ApplicationVersion>1.0.0.%2a</ApplicationVersion>
+    <IsWebBootstrapper>false</IsWebBootstrapper>
+    <UseApplicationTrust>false</UseApplicationTrust>
+    <BootstrapperEnabled>true</BootstrapperEnabled>
   </PropertyGroup>
   <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
     <PlatformTarget>AnyCPU</PlatformTarget>
@@ -63,6 +78,18 @@
   <ItemGroup>
     <Content Include="Visualpharm-Hardware-Hard-disk.ico" />
   </ItemGroup>
+  <ItemGroup>
+    <BootstrapperPackage Include=".NETFramework,Version=v4.5.2">
+      <Visible>False</Visible>
+      <ProductName>Microsoft .NET Framework 4.5.2 %28x86 and x64%29</ProductName>
+      <Install>true</Install>
+    </BootstrapperPackage>
+    <BootstrapperPackage Include="Microsoft.Net.Framework.3.5.SP1">
+      <Visible>False</Visible>
+      <ProductName>.NET Framework 3.5 SP1</ProductName>
+      <Install>false</Install>
+    </BootstrapperPackage>
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
   <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
        Other similar extension points exist, see Microsoft.Common.targets.