{
	"": [
		"--------------------------------------------------------------------------------------------",
		"Copyright (c) Microsoft Corporation. All rights reserved.",
		"Licensed under the Source EULA. See License.txt in the project root for license information.",
		"--------------------------------------------------------------------------------------------",
		"Do not edit this file. It is machine generated."
	],
	"version": "1.0.0",
	"contents": {
		"dist/localizedConstants": {
			"schemaCompareDialog.differentSourceMessage": "已選取其他來源結構描述。要比較以查看比較結果嗎?",
			"schemaCompareDialog.differentTargetMessage": "已選取其他目標結構描述。要比較以查看比較結果嗎?",
			"schemaCompare.actionColumn": "動作",
			"schemaCompare.addAction": "新增",
			"schemaCompare.updateButton": "套用",
			"schemaCompare.applyButtonEnabledTitle": "將變更套用至目標",
			"schemaCompare.applyButtonDisabledTitle": "當目標為資料庫或資料庫專案時，會啟用套用",
			"schemaCompare.ApplyConfirmation": "確定要更新目標嗎?",
			"schemaCompareDialog.cancel": "取消",
			"schemaCompare.cancelErrorMessage": "取消結構描述比較失敗: '{0}'",
			"schemaCompare.cannotExcludeMessage": "無法排除 {0}。包含的相依性已存在",
			"schemaCompare.cannotExcludeMessageWithDependent": "無法排除 {0}。包含的相依性已存在，例如 {1}",
			"schemaCompare.cannotIncludeMessage": "無法包含 {0}。排除的相依性已存在",
			"schemaCompare.cannotIncludeMessageWithDependent": "不無法包含 {0}。排除的相依性已存在，例如 {1}",
			"schemaCompare.changeAction": "變更",
			"schemaCompare.compareButton": "比較",
			"schemaCompare.CompareDetailsTitle": "比較詳細資料",
			"schemaCompare.differencesTableTitle": "來源和目標之間的比較",
			"schemaCompare.dacpacRadioButtonLabel": "資料層應用程式檔案 (.dacpac)",
			"schemaCompareDialog.databaseDropdownTitle": "資料庫",
			"schemaCompare.databaseButtonLabel": "資料庫",
			"schemaCompare.projectButtonLabel": "資料庫專案",
			"schemaCompare.deleteAction": "刪除",
			"schemaCompareDialog.differentSourceTargetMessage": "已選取不同的來源和結構描述。要比較以查看比較結果嗎?",
			"schemaCompare.GetConnectionString": "是否要連接到 {0}?",
			"file": "FILE",
			"schemaCompareDialog.fileTextBoxLabel": "檔案",
			"flat": "一般",
			"schemaCompareDialog.structureDropdownLabel": "資料夾結構",
			"SchemaCompare.GeneralOptionsLabel": "一般選項",
			"schemaCompare.generateScriptButton": "產生指令碼",
			"schemaCompare.generateScriptErrorMessage": "無法產生指令碼: '{0}'",
			"schemaCompare.generateScriptButtonDisabledTitle": "當目標為資料庫時，會啟用產生指令碼",
			"schemaCompare.generateScriptEnabledButton": "產生指令碼以將變更部署至目標",
			"schemaCompare.includeColumnName": "包括",
			"SchemaCompare.ObjectTypesOptionsLabel": "包含物件類型",
			"schemaCompare.waitText": "正在將比較結果初始化。這可能需要一些時間。",
			"schemaCompare.openScmpButtonTitle": "載入儲存在 .scmp 檔案中的來源、目標和選項",
			"schemaCompareDialog.No": "否",
			"schemaCompare.applyNoChanges": "沒有任何要套用的變更",
			"schemaCompare.generateScriptNoChanges": "指令碼沒有任何變更",
			"schemaCompare.noDifferences": "找不到任何結構描述差異。",
			"schemaCompareDialog.ok": "確定",
			"objectType": "物件類型",
			"schemaCompare.openFile": "開啟",
			"schemaCompare.openScmpButton": "開啟 .scmp 檔案",
			"schemaCompare.openScmpErrorMessage": "無法開啟 scmp: '{0}'",
			"schemaCompare.optionsButton": "選項",
			"schemaCompareOptions.RecompareMessage": "選項已變更。要重新比較以查看比較嗎?",
			"schemaCompare.includeExcludeInfoMessage": "請注意，包含/排除作業可能需要一些時間來計算受影響的相依性",
			"schemaCompare.RecompareToRefresh": "按下 [比較] 即可重新整理比較結果。",
			"schemaCompare.applySuccess": "已成功更新專案",
			"SchemaCompareOptionsDialog.Reset": "重設",
			"schemaCompare.saveFile": "儲存",
			"schemaCompare.saveScmpButton": "儲存 .scmp 檔案",
			"schemaCompare.saveScmpErrorMessage": "無法儲存 scmp: '{0}'",
			"schemaCompare.saveScmpButtonTitle": "儲存來源和目標、選項及排除的元素",
			"schema": "結構描述",
			"schemaCompare.dialogTitle": "結構描述比較",
			"schemaCompare.updateErrorMessage": "結構描述比較套用失敗 '{0}'",
			"SchemaCompare.SchemaCompareOptionsDialogLabel": "結構描述比較選項",
			"schemaCompare.compareErrorMessage": "結構描述比較失敗: {0}",
			"schemaObjectType": "結構描述/物件類型",
			"schemaCompare.sourceButtonTitle": "選取來源",
			"schemaCompare.targetButtonTitle": "選取目標",
			"schemaCompare.selectConnection": "選取連線",
			"schemaCompare.selectSourceFile": "選取來源檔案",
			"schemaCompare.selectTargetFile": "選取目標檔案",
			"schemaCompareDialog.serverDropdownTitle": "伺服器​",
			"schemaCompareDialog.SourceTitle": "來源",
			"schemaCompareDialog.sourceDatabaseDropdown": "來源資料庫",
			"schemaCompare.sourceNameColumn": "來源名稱",
			"schemaCompareDialog.sourceServerDropdown": "來源伺服器",
			"schemaCompareDialog.sourceTextBox": "原始程式檔",
			"schemaCompare.cancelCompareButton": "停止",
			"schemaCompare.switchDirectionButton": "切換方向",
			"schemaCompare.switchButtonTitle": "切換來源和目標",
			"schemaCompareDialog.TargetTitle": "目標",
			"schemaCompareDialog.targetDatabaseDropdown": "目標資料庫",
			"targetStructure": "目的檔案夾結構",
			"schemaCompare.targetNameColumn": "目標名稱",
			"schemaCompareDialog.targetServerDropdown": "目標伺服器",
			"schemaCompareDialog.targetTextBox": "目標檔案",
			"schemaCompareDialog.dspErrorSource": "來源 .sqlproj 檔案未指定資料庫結構描述元件",
			"schemaCompareDialog.noProjectExtensionApply": "需要 sql-database-projects 延伸模組，才能將變更套用至專案",
			"schemaCompareDialog.noProjectExtension": "需要 sql-database-projects 延伸模組，才能與資料庫專案進行結構描述比較",
			"schemaCompareDialog.dspErrorTarget": "目標 .sqlproj 檔案未指定資料庫結構描述元件",
			"schemaCompare.applyError": "更新專案時發生錯誤",
			"schemaCompare.startText": "若要比較兩個結構描述，請先選取來源結構描述，然後按下 [比較]。",
			"schemaCompare.typeColumn": "類型",
			"schemaCompare.radioButtonsLabel": "類型",
			"schemaCompareDialog.Yes": "是",
			"schemaCompareDialog.defaultUser": "預設",
			"OptionNotFoundWarningMessage": "標籤: 選項值名稱查閱中不存在 {0}"
		},
		"package": {
			"schemaCompare.openInScmp": "在 [結構描述比較] 中開啟",
			"schemaCompare.runComparison": "執行結構描述比較",
			"displayName": "SQL Server 結構描述比較",
			"description": "Azure Data Studio 的 SQL Server 結構描述比較支援比較資料庫和 dacpac 的結構描述。",
			"schemaCompare.start": "結構描述比較"
		}
	}
}