[Loc] update to xlfs and resx for 3-27-2023 (#1973)

src/Microsoft.SqlTools.ServiceLayer/Localization/sr.de.resx

@@ -1321,10 +1321,10 @@
     <value>Ungültiger Wert „{0}“ für das Verschlüsseln. Gültige Werte sind „Optional“, „Obligatorisch“, „Streng", „WAHR“, „FALSCH“, „Ja“ oder „Nein“.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol" xml:space="preserve">
-    <value>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</value>
+    <value>Ungültiger Wert "{0}" für das Nachweisprotokoll. Gültige Werte sind "AAS", "HGS" und "Keine".</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination" xml:space="preserve">
-    <value>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</value>
+    <value>Für das Nachweisprotokoll und die Nachweis-URL muss Always Encrypted mit Secure Enclaves auf "Aktiviert" festgelegt sein.</value>
   </data>
   <data name="SqlCmdExitOnError" xml:space="preserve">
     <value>Fehler bei der Batchausführung. Der Vorgang wird beendet.</value>
@@ -3998,13 +3998,13 @@ Der Abfrageprozessor schätzt, dass durch das Implementieren des folgenden Index
     <value>Integrierte Schemas</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol" xml:space="preserve">
-    <value>Attestation URL cannot be empty with the selected value of Attestation protocol.</value>
+    <value>Die Nachweis-URL darf mit dem ausgewählten Wert des Nachweisprotokolls nicht leer sein.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidSecureEnclaves" xml:space="preserve">
-    <value>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</value>
+    <value>Ungültiger Wert "{0}" für Secure Enclaves. Gültige Werte sind "Enabled" und "Disabled".</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl" xml:space="preserve">
-    <value>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</value>
+    <value>Die Nachweis-URL darf nicht mit dem Nachweisprotokoll "Keine" angegeben werden. Legen Sie entweder das entsprechende Nachweisprotokoll fest, oder entfernen Sie die Nachweis-URL aus den Verbindungseigenschaften.</value>
   </data>
   <data name="DefaultLanguagePlaceholder" xml:space="preserve">
     <value>&lt;default&gt;</value>
@@ -4016,6 +4016,6 @@ Der Abfrageprozessor schätzt, dass durch das Implementieren des folgenden Index
     <value>Das Objekt konnte nicht umbenannt werden. URN: '{0}'.</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves" xml:space="preserve">
-    <value>Attestation protocol cannot be empty with Secure enclaves enabled.</value>
+    <value>Das Nachweisprotokoll darf nicht leer sein, wenn Secure Enclaves aktiviert ist.</value>
   </data>
 </root>

src/Microsoft.SqlTools.ServiceLayer/Localization/sr.es.resx

@@ -1321,10 +1321,10 @@
     <value>Valor no válido "{0}" para Cifrar. Los valores válidos son "Optional", "Mandatory", "Strict", "True", "False", "Yes" y "No".</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol" xml:space="preserve">
-    <value>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</value>
+    <value>Valor no válido '{0}' para el protocolo de atestación. Los valores válidos son "AAS", "HGS" y "None".</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination" xml:space="preserve">
-    <value>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</value>
+    <value>El protocolo de atestación y la dirección URL de atestación requieren que Always Encrypted con enclaves seguros se establezcan en Habilitado.</value>
   </data>
   <data name="SqlCmdExitOnError" xml:space="preserve">
     <value>Error durante la ejecución del lote. Saliendo.</value>
@@ -3998,13 +3998,13 @@ El procesador de consultas estima que la implementación del siguiente índice p
     <value>Esquemas integrados</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol" xml:space="preserve">
-    <value>Attestation URL cannot be empty with the selected value of Attestation protocol.</value>
+    <value>La dirección URL de atestación no puede estar vacía con el valor seleccionado del protocolo de atestación.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidSecureEnclaves" xml:space="preserve">
-    <value>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</value>
+    <value>Valor no válido '{0}' para enclaves seguros. Los valores válidos son "Habilitado" y "Deshabilitado".</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl" xml:space="preserve">
-    <value>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</value>
+    <value>No se debe especificar la dirección URL de atestación con el protocolo de atestación 'None'. Establezca el protocolo de atestación adecuado o quite la dirección URL de atestación de las propiedades de conexión.</value>
   </data>
   <data name="DefaultLanguagePlaceholder" xml:space="preserve">
     <value>&lt;predeterminado&gt;</value>
@@ -4016,6 +4016,6 @@ El procesador de consultas estima que la implementación del siguiente índice p
     <value>No se pudo cambiar el nombre del objeto. URN: '{0}'.</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves" xml:space="preserve">
-    <value>Attestation protocol cannot be empty with Secure enclaves enabled.</value>
+    <value>El protocolo de atestación no puede estar vacío con enclaves seguros habilitados.</value>
   </data>
 </root>

src/Microsoft.SqlTools.ServiceLayer/Localization/sr.fr.resx

@@ -1321,10 +1321,10 @@
     <value>Valeur non valide '{0}' pour Chiffrer. Les valeurs valides sont 'Optional', 'Mandatory', 'Strict', 'True', 'False', 'Yes' et 'No'.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol" xml:space="preserve">
-    <value>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</value>
+    <value>Valeur non valide '{0}' pour le protocole d'attestation. Les valeurs valides sont 'AAS', 'HGS' et 'Aucun'.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination" xml:space="preserve">
-    <value>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</value>
+    <value>Le protocole d'attestation et l'URL d'attestation nécessitent que Always Encrypted avec Secure enclaves soit défini sur Enabled.</value>
   </data>
   <data name="SqlCmdExitOnError" xml:space="preserve">
     <value>Une erreur s'est produite durant l'exécution du lot. Fermeture en cours.</value>
@@ -3998,13 +3998,13 @@ Le processeur de requêtes estime que l'implémentation de l'index suivant peut
     <value>Schémas intégrés</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol" xml:space="preserve">
-    <value>Attestation URL cannot be empty with the selected value of Attestation protocol.</value>
+    <value>L'URL d'attestation ne peut pas être vide avec la valeur sélectionnée du protocole d'attestation.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidSecureEnclaves" xml:space="preserve">
-    <value>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</value>
+    <value>Valeur non valide '{0}' pour les enclaves sécurisées. Les valeurs valides sont 'Activé' et 'Désactivé'.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl" xml:space="preserve">
-    <value>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</value>
+    <value>L'URL d'attestation ne doit pas être spécifiée avec le protocole d'attestation "Aucun". Définissez le protocole d'attestation approprié ou supprimez l'URL d'attestation des propriétés de connexion.</value>
   </data>
   <data name="DefaultLanguagePlaceholder" xml:space="preserve">
     <value>&lt;defaut&gt;</value>
@@ -4016,6 +4016,6 @@ Le processeur de requêtes estime que l'implémentation de l'index suivant peut
     <value>L'objet n'a pas pu être renommé. UR : '{0}'.</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves" xml:space="preserve">
-    <value>Attestation protocol cannot be empty with Secure enclaves enabled.</value>
+    <value>Le protocole d'attestation ne peut pas être vide avec les enclaves sécurisées activées.</value>
   </data>
 </root>

src/Microsoft.SqlTools.ServiceLayer/Localization/sr.it.resx

@@ -1321,10 +1321,10 @@
     <value>Valore '{0}' non valido per la crittografia. I valori validi sono: 'Optional', 'Mandatory', 'Strict', 'True', 'False', 'Yes' e 'No'.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol" xml:space="preserve">
-    <value>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</value>
+    <value>Valore '{0}' non valido per il protocollo di attestazione. I valori validi sono 'AAS', 'HGS' e 'None'.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination" xml:space="preserve">
-    <value>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</value>
+    <value>Il protocollo di attestazione e l'URL di attestazione richiedono che Always Encrypted con enclavi sicure sia impostato su Abilitato.</value>
   </data>
   <data name="SqlCmdExitOnError" xml:space="preserve">
     <value>Si è verificato un errore durante l'esecuzione del batch. Chiusura in corso.</value>
@@ -3998,13 +3998,13 @@ Query Processor stima che l'implementazione del seguente indice potrebbe miglior
     <value>Schemi predefiniti</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol" xml:space="preserve">
-    <value>Attestation URL cannot be empty with the selected value of Attestation protocol.</value>
+    <value>L'URL di attestazione non può essere vuoto con il valore selezionato del protocollo di attestazione.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidSecureEnclaves" xml:space="preserve">
-    <value>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</value>
+    <value>Valore '{0}' non valido per le enclavi sicure. I valori validi sono 'Enabled' e 'Disabled'.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl" xml:space="preserve">
-    <value>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</value>
+    <value>L'URL di attestazione non deve essere specificato con il protocollo di attestazione 'None'. Impostare il protocollo di attestazione appropriato o rimuovere l'URL di attestazione dalle proprietà della connessione.</value>
   </data>
   <data name="DefaultLanguagePlaceholder" xml:space="preserve">
     <value>&lt;predefinita&gt;</value>
@@ -4016,6 +4016,6 @@ Query Processor stima che l'implementazione del seguente indice potrebbe miglior
     <value>Non è stato possibile rinominare l'oggetto. URN: '{0}'.</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves" xml:space="preserve">
-    <value>Attestation protocol cannot be empty with Secure enclaves enabled.</value>
+    <value>Il protocollo di attestazione non può essere vuoto con enclavi sicure abilitate.</value>
   </data>
 </root>

src/Microsoft.SqlTools.ServiceLayer/Localization/sr.ja.resx

@@ -1321,10 +1321,10 @@
     <value>Encrypt の値 '{0}' が無効です。有効な値は、'Optional'、'Mandatory'、'Strict'、'True'、'False'、'Yes'、および 'No' です。</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol" xml:space="preserve">
-    <value>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</value>
+    <value>構成証明プロトコルの値 '{0}' が無効です。有効な値は、'AAS'、'HGS'、および 'None' です。</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination" xml:space="preserve">
-    <value>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</value>
+    <value>構成証明プロトコルと構成証明 URL では、セキュリティで保護されたエンクレーブを持つAlways Encryptedを有効に設定する必要があります。</value>
   </data>
   <data name="SqlCmdExitOnError" xml:space="preserve">
     <value>バッチの実行中にエラーが発生しました。終了します。</value>
@@ -3998,13 +3998,13 @@
     <value>組み込みスキーマ</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol" xml:space="preserve">
-    <value>Attestation URL cannot be empty with the selected value of Attestation protocol.</value>
+    <value>構成証明の URL を、構成証明プロトコルの選択された値と共に空にすることはできません。</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidSecureEnclaves" xml:space="preserve">
-    <value>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</value>
+    <value>セキュリティで保護されたエンクレーブの値 '{0}' が無効です。有効な値は 'Enabled' と 'Disabled' です。</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl" xml:space="preserve">
-    <value>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</value>
+    <value>構成証明 URL を構成証明プロトコル 'None' で指定することはできません。適切な構成証明プロトコルを設定するか、接続プロパティから構成証明 URL を削除します。</value>
   </data>
   <data name="DefaultLanguagePlaceholder" xml:space="preserve">
     <value>&lt;既定&gt;</value>
@@ -4016,6 +4016,6 @@
     <value>オブジェクトの名前を変更できませんでした。URN: '{0}'。</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves" xml:space="preserve">
-    <value>Attestation protocol cannot be empty with Secure enclaves enabled.</value>
+    <value>セキュア エンクレーブを有効にした状態で構成証明プロトコルを空にすることはできません。</value>
   </data>
 </root>

src/Microsoft.SqlTools.ServiceLayer/Localization/sr.ko.resx

@@ -1321,10 +1321,10 @@
     <value>암호화에 대한 잘못된 값 '{0}'. 유효한 값은 'Optional', 'Mandatory', 'Strict', 'True', 'False', 'Yes' 및 'No'.입니다.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol" xml:space="preserve">
-    <value>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</value>
+    <value>증명 프로토콜에 대한 '{0}' 값이 잘못되었습니다. 유효한 값은 'AAS', 'HGS', 'None'입니다.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination" xml:space="preserve">
-    <value>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</value>
+    <value>증명 프로토콜 및 증명 URL을 사용하려면 보안 enclave를 사용하는 Always Encrypted를 사용으로 설정해야 합니다.</value>
   </data>
   <data name="SqlCmdExitOnError" xml:space="preserve">
     <value>일괄 처리를 실행하는 동안 오류가 발생하여 종료합니다.</value>
@@ -3998,13 +3998,13 @@
     <value>기본 제공 스키마</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol" xml:space="preserve">
-    <value>Attestation URL cannot be empty with the selected value of Attestation protocol.</value>
+    <value>증명 URL은 증명 프로토콜의 선택된 값으로 비워 둘 수 없습니다.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidSecureEnclaves" xml:space="preserve">
-    <value>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</value>
+    <value>보안 Enclaves에 대한 '{0}' 값이 잘못되었습니다. 유효한 값은 '사용' 및 '사용 안 함'입니다.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl" xml:space="preserve">
-    <value>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</value>
+    <value>증명 URL은 증명 프로토콜 'None'으로 지정될 수 없습니다. 적절한 증명 프로토콜을 설정하거나 연결 속성에서 증명 URL을 제거하세요.</value>
   </data>
   <data name="DefaultLanguagePlaceholder" xml:space="preserve">
     <value>&lt;default&gt;</value>
@@ -4016,6 +4016,6 @@
     <value>개체의 이름을 바꿀 수 없습니다. URN: '{0}'.</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves" xml:space="preserve">
-    <value>Attestation protocol cannot be empty with Secure enclaves enabled.</value>
+    <value>보안 enclave를 사용하도록 설정한 상태에서는 증명 프로토콜을 비워 둘 수 없습니다.</value>
   </data>
 </root>

src/Microsoft.SqlTools.ServiceLayer/Localization/sr.pt-br.resx

@@ -1321,10 +1321,10 @@
     <value>Valor inválido '{0}' para Criptografar. Os valores válidos são 'Optional', 'Mandatory', 'Strict', 'True', 'False', 'Yes' e 'No'.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol" xml:space="preserve">
-    <value>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</value>
+    <value>Valor inválido '{0}' do protocolo de atestado. Os valores válidos são 'AAS', 'HGS' e 'None'.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination" xml:space="preserve">
-    <value>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</value>
+    <value>O protocolo de Atestado e a URL de Atestado exigem que o Always Encrypted com enclaves seguros seja definido como Habilitado.</value>
   </data>
   <data name="SqlCmdExitOnError" xml:space="preserve">
     <value>Erro durante a execução do lote. Saindo.</value>
@@ -3998,13 +3998,13 @@ O Processador de Consultas estima que a implementação do índice a seguir pode
     <value>Esquemas Internos</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol" xml:space="preserve">
-    <value>Attestation URL cannot be empty with the selected value of Attestation protocol.</value>
+    <value>A URL de Atestado não pode ficar vazia com o valor selecionado do Protocolo de Atestado.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidSecureEnclaves" xml:space="preserve">
-    <value>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</value>
+    <value>Valor inválido '{0}' dos enclaves seguros. Os valores válidos são 'Enabled' e 'Disabled'.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl" xml:space="preserve">
-    <value>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</value>
+    <value>A URL de Atestado não deve ser especificada com o protocolo de Atestado 'None'. Defina o protocolo de Atestado apropriado ou remova a URL de Atestado das propriedades de conexão.</value>
   </data>
   <data name="DefaultLanguagePlaceholder" xml:space="preserve">
     <value>&lt;default&gt;</value>
@@ -4016,6 +4016,6 @@ O Processador de Consultas estima que a implementação do índice a seguir pode
     <value>Não foi possível renomear o objeto. URN: '{0}'.</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves" xml:space="preserve">
-    <value>Attestation protocol cannot be empty with Secure enclaves enabled.</value>
+    <value>O Protocolo de Atestado não pode ficar vazio com enclaves seguros ativados.</value>
   </data>
 </root>

src/Microsoft.SqlTools.ServiceLayer/Localization/sr.ru.resx

@@ -1321,10 +1321,10 @@
     <value>Недопустимое значение "{0}" для параметра Encrypt. Допустимые значения: "Optional" (необязательно), "Mandatory" (обязательно), "Strict" (строго), "True" (истина), "False" (ложь), "Yes" (да) и "No" (нет).</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol" xml:space="preserve">
-    <value>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</value>
+    <value>Недопустимое значение "{0}" для протокола аттестации. Допустимые значения: "AAS", "HGS" и "None" (Нет).</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination" xml:space="preserve">
-    <value>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</value>
+    <value>Протокол аттестации и URL-адрес аттестации требуют включения Always Encrypted с безопасными анклавами.</value>
   </data>
   <data name="SqlCmdExitOnError" xml:space="preserve">
     <value>При выполнении пакета возникла ошибка. Выполняется выход.</value>
@@ -3998,13 +3998,13 @@
     <value>Встроенные схемы</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol" xml:space="preserve">
-    <value>Attestation URL cannot be empty with the selected value of Attestation protocol.</value>
+    <value>URL-адрес аттестации не может быть пустым с выбранным значением протокола аттестации.</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidSecureEnclaves" xml:space="preserve">
-    <value>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</value>
+    <value>Недопустимое значение "{0}" для безопасных анклавов. Допустимые значения: "Enabled" (Включено) и "Disabled" (Отключено).</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl" xml:space="preserve">
-    <value>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</value>
+    <value>Недопустимо задавать URL-адрес аттестации с протоколом аттестации "None". Настройте подходящий протокол или удалите URL-адрес из свойств подключения.</value>
   </data>
   <data name="DefaultLanguagePlaceholder" xml:space="preserve">
     <value>&lt;default&gt;</value>
@@ -4016,6 +4016,6 @@
     <value>Не удалось переименовать объект. Унифицированное имя ресурса: "{0}".</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves" xml:space="preserve">
-    <value>Attestation protocol cannot be empty with Secure enclaves enabled.</value>
+    <value>Протокол аттестации не может быть пустым, если включены безопасные анклавы.</value>
   </data>
 </root>

src/Microsoft.SqlTools.ServiceLayer/Localization/sr.zh-Hans.resx

@@ -1321,10 +1321,10 @@
     <value>加密的值“{0}”无效。有效值为 “Optional”、“Mandatory”、“Strict”、“True”、“False”、“Yes”和“No”。</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol" xml:space="preserve">
-    <value>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</value>
+    <value>Attestation 协议的值“{0}”无效。有效值为“AAS”，“HGS”和“None”。</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination" xml:space="preserve">
-    <value>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</value>
+    <value>证明协议和证明 URL 要求启用具有安全隔离区的始终加密。</value>
   </data>
   <data name="SqlCmdExitOnError" xml:space="preserve">
     <value>在执行批处理期间遇到错误。正在退出。</value>
@@ -3998,13 +3998,13 @@
     <value>内置架构</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol" xml:space="preserve">
-    <value>Attestation URL cannot be empty with the selected value of Attestation protocol.</value>
+    <value>证明 URL 不能为空，且所选值为证明协议。</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidSecureEnclaves" xml:space="preserve">
-    <value>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</value>
+    <value>Secure enclave 的值“{0}”无效。有效值为“已启用”和“已禁用”。</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl" xml:space="preserve">
-    <value>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</value>
+    <value>证明 URL 不能使用“无”的证明协议指定。请设置适当的证明协议或从连接属性中删除证明 URL。</value>
   </data>
   <data name="DefaultLanguagePlaceholder" xml:space="preserve">
     <value>&lt;default&gt;</value>
@@ -4016,6 +4016,6 @@
     <value>无法重命名对象。URN:“{0}”。</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves" xml:space="preserve">
-    <value>Attestation protocol cannot be empty with Secure enclaves enabled.</value>
+    <value>证明协议不能为空且已启用安全 enclave。</value>
   </data>
 </root>

src/Microsoft.SqlTools.ServiceLayer/Localization/sr.zh-Hant.resx

@@ -1321,10 +1321,10 @@
     <value>加密的值 '{0}' 無效。有效值為 'Optional'、'Mandatory'、'Strict'、'True'、'False'、'Yes' 和 'No'。</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol" xml:space="preserve">
-    <value>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</value>
+    <value>證明通訊協定的無效值 '{0}'。有效的值為 'AAS'、'HGS' 及 [無]。</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination" xml:space="preserve">
-    <value>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</value>
+    <value>證明通訊協定與證明 URL 需要將具有安全記憶體保護區的 Always Encrypted 設定為 [已啟用]。</value>
   </data>
   <data name="SqlCmdExitOnError" xml:space="preserve">
     <value>執行批次期間發生錯誤，結束中。</value>
@@ -3998,13 +3998,13 @@
     <value>內建結構描述</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol" xml:space="preserve">
-    <value>Attestation URL cannot be empty with the selected value of Attestation protocol.</value>
+    <value>具有證明通訊協定的選取值時，證明 URL 不可為空白。</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidSecureEnclaves" xml:space="preserve">
-    <value>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</value>
+    <value>安全記憶體保護區的無效值 '{0}'。有效的值為 [已啟用] 和 [已停用]。</value>
   </data>
   <data name="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl" xml:space="preserve">
-    <value>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</value>
+    <value>無法在證明通訊協定為 [無] 的情況下指定證明 URL。請設定適當的證明通訊協定，或從連線屬性移除證明 URL。</value>
   </data>
   <data name="DefaultLanguagePlaceholder" xml:space="preserve">
     <value>&lt;預設&gt;</value>
@@ -4016,6 +4016,6 @@
     <value>無法重新命名物件。URN: '{0}'。</value>
   </data>
   <data name="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves" xml:space="preserve">
-    <value>Attestation protocol cannot be empty with Secure enclaves enabled.</value>
+    <value>安全記憶體保護區啟用時，證明通訊協定不可為空白。</value>
   </data>
 </root>

src/Microsoft.SqlTools.ServiceLayer/Localization/transXliff/sr.de.xlf

@@ -2043,13 +2043,13 @@
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol">
         <source>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</source>
-        <target state="new">Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</target>
+        <target state="translated">Ungültiger Wert "{0}" für das Nachweisprotokoll. Gültige Werte sind "AAS", "HGS" und "Keine".</target>
         <note>.
  Parameters: 0 - enclaveAttestationProtocol (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination">
         <source>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</source>
-        <target state="new">The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</target>
+        <target state="translated">Für das Nachweisprotokoll und die Nachweis-URL muss Always Encrypted mit Secure Enclaves auf "Aktiviert" festgelegt sein.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="SqlCmdExitOnError">
@@ -6552,18 +6552,18 @@ Der Abfrageprozessor schätzt, dass durch das Implementieren des folgenden Index
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol">
         <source>Attestation URL cannot be empty with the selected value of Attestation protocol.</source>
-        <target state="new">Attestation URL cannot be empty with the selected value of Attestation protocol.</target>
+        <target state="translated">Die Nachweis-URL darf mit dem ausgewählten Wert des Nachweisprotokolls nicht leer sein.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidSecureEnclaves">
         <source>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</source>
-        <target state="new">Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</target>
+        <target state="translated">Ungültiger Wert "{0}" für Secure Enclaves. Gültige Werte sind "Enabled" und "Disabled".</target>
         <note>.
  Parameters: 0 - secureEnclaves (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl">
         <source>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</source>
-        <target state="new">The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</target>
+        <target state="translated">Die Nachweis-URL darf nicht mit dem Nachweisprotokoll "Keine" angegeben werden. Legen Sie entweder das entsprechende Nachweisprotokoll fest, oder entfernen Sie die Nachweis-URL aus den Verbindungseigenschaften.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="DefaultLanguagePlaceholder">
@@ -6584,7 +6584,7 @@ Der Abfrageprozessor schätzt, dass durch das Implementieren des folgenden Index
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves">
         <source>Attestation protocol cannot be empty with Secure enclaves enabled.</source>
-        <target state="new">Attestation protocol cannot be empty with Secure enclaves enabled.</target>
+        <target state="translated">Das Nachweisprotokoll darf nicht leer sein, wenn Secure Enclaves aktiviert ist.</target>
         <note></note>
       </trans-unit>
     </body>

src/Microsoft.SqlTools.ServiceLayer/Localization/transXliff/sr.es.xlf

@@ -2043,13 +2043,13 @@
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol">
         <source>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</source>
-        <target state="new">Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</target>
+        <target state="translated">Valor no válido '{0}' para el protocolo de atestación. Los valores válidos son "AAS", "HGS" y "None".</target>
         <note>.
  Parameters: 0 - enclaveAttestationProtocol (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination">
         <source>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</source>
-        <target state="new">The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</target>
+        <target state="translated">El protocolo de atestación y la dirección URL de atestación requieren que Always Encrypted con enclaves seguros se establezcan en Habilitado.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="SqlCmdExitOnError">
@@ -6552,18 +6552,18 @@ El procesador de consultas estima que la implementación del siguiente índice p
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol">
         <source>Attestation URL cannot be empty with the selected value of Attestation protocol.</source>
-        <target state="new">Attestation URL cannot be empty with the selected value of Attestation protocol.</target>
+        <target state="translated">La dirección URL de atestación no puede estar vacía con el valor seleccionado del protocolo de atestación.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidSecureEnclaves">
         <source>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</source>
-        <target state="new">Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</target>
+        <target state="translated">Valor no válido '{0}' para enclaves seguros. Los valores válidos son "Habilitado" y "Deshabilitado".</target>
         <note>.
  Parameters: 0 - secureEnclaves (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl">
         <source>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</source>
-        <target state="new">The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</target>
+        <target state="translated">No se debe especificar la dirección URL de atestación con el protocolo de atestación 'None'. Establezca el protocolo de atestación adecuado o quite la dirección URL de atestación de las propiedades de conexión.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="DefaultLanguagePlaceholder">
@@ -6584,7 +6584,7 @@ El procesador de consultas estima que la implementación del siguiente índice p
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves">
         <source>Attestation protocol cannot be empty with Secure enclaves enabled.</source>
-        <target state="new">Attestation protocol cannot be empty with Secure enclaves enabled.</target>
+        <target state="translated">El protocolo de atestación no puede estar vacío con enclaves seguros habilitados.</target>
         <note></note>
       </trans-unit>
     </body>

src/Microsoft.SqlTools.ServiceLayer/Localization/transXliff/sr.fr.xlf

@@ -2043,13 +2043,13 @@
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol">
         <source>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</source>
-        <target state="new">Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</target>
+        <target state="translated">Valeur non valide '{0}' pour le protocole d'attestation. Les valeurs valides sont 'AAS', 'HGS' et 'Aucun'.</target>
         <note>.
  Parameters: 0 - enclaveAttestationProtocol (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination">
         <source>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</source>
-        <target state="new">The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</target>
+        <target state="translated">Le protocole d'attestation et l'URL d'attestation nécessitent que Always Encrypted avec Secure enclaves soit défini sur Enabled.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="SqlCmdExitOnError">
@@ -6552,18 +6552,18 @@ Le processeur de requêtes estime que l'implémentation de l'index suivant peut
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol">
         <source>Attestation URL cannot be empty with the selected value of Attestation protocol.</source>
-        <target state="new">Attestation URL cannot be empty with the selected value of Attestation protocol.</target>
+        <target state="translated">L'URL d'attestation ne peut pas être vide avec la valeur sélectionnée du protocole d'attestation.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidSecureEnclaves">
         <source>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</source>
-        <target state="new">Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</target>
+        <target state="translated">Valeur non valide '{0}' pour les enclaves sécurisées. Les valeurs valides sont 'Activé' et 'Désactivé'.</target>
         <note>.
  Parameters: 0 - secureEnclaves (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl">
         <source>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</source>
-        <target state="new">The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</target>
+        <target state="translated">L'URL d'attestation ne doit pas être spécifiée avec le protocole d'attestation "Aucun". Définissez le protocole d'attestation approprié ou supprimez l'URL d'attestation des propriétés de connexion.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="DefaultLanguagePlaceholder">
@@ -6584,7 +6584,7 @@ Le processeur de requêtes estime que l'implémentation de l'index suivant peut
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves">
         <source>Attestation protocol cannot be empty with Secure enclaves enabled.</source>
-        <target state="new">Attestation protocol cannot be empty with Secure enclaves enabled.</target>
+        <target state="translated">Le protocole d'attestation ne peut pas être vide avec les enclaves sécurisées activées.</target>
         <note></note>
       </trans-unit>
     </body>

src/Microsoft.SqlTools.ServiceLayer/Localization/transXliff/sr.it.xlf

@@ -2043,13 +2043,13 @@
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol">
         <source>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</source>
-        <target state="new">Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</target>
+        <target state="translated">Valore '{0}' non valido per il protocollo di attestazione. I valori validi sono 'AAS', 'HGS' e 'None'.</target>
         <note>.
  Parameters: 0 - enclaveAttestationProtocol (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination">
         <source>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</source>
-        <target state="new">The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</target>
+        <target state="translated">Il protocollo di attestazione e l'URL di attestazione richiedono che Always Encrypted con enclavi sicure sia impostato su Abilitato.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="SqlCmdExitOnError">
@@ -6552,18 +6552,18 @@ Query Processor stima che l'implementazione del seguente indice potrebbe miglior
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol">
         <source>Attestation URL cannot be empty with the selected value of Attestation protocol.</source>
-        <target state="new">Attestation URL cannot be empty with the selected value of Attestation protocol.</target>
+        <target state="translated">L'URL di attestazione non può essere vuoto con il valore selezionato del protocollo di attestazione.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidSecureEnclaves">
         <source>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</source>
-        <target state="new">Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</target>
+        <target state="translated">Valore '{0}' non valido per le enclavi sicure. I valori validi sono 'Enabled' e 'Disabled'.</target>
         <note>.
  Parameters: 0 - secureEnclaves (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl">
         <source>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</source>
-        <target state="new">The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</target>
+        <target state="translated">L'URL di attestazione non deve essere specificato con il protocollo di attestazione 'None'. Impostare il protocollo di attestazione appropriato o rimuovere l'URL di attestazione dalle proprietà della connessione.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="DefaultLanguagePlaceholder">
@@ -6584,7 +6584,7 @@ Query Processor stima che l'implementazione del seguente indice potrebbe miglior
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves">
         <source>Attestation protocol cannot be empty with Secure enclaves enabled.</source>
-        <target state="new">Attestation protocol cannot be empty with Secure enclaves enabled.</target>
+        <target state="translated">Il protocollo di attestazione non può essere vuoto con enclavi sicure abilitate.</target>
         <note></note>
       </trans-unit>
     </body>

src/Microsoft.SqlTools.ServiceLayer/Localization/transXliff/sr.ja.xlf

@@ -2043,13 +2043,13 @@
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol">
         <source>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</source>
-        <target state="new">Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</target>
+        <target state="translated">構成証明プロトコルの値 '{0}' が無効です。有効な値は、'AAS'、'HGS'、および 'None' です。</target>
         <note>.
  Parameters: 0 - enclaveAttestationProtocol (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination">
         <source>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</source>
-        <target state="new">The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</target>
+        <target state="translated">構成証明プロトコルと構成証明 URL では、セキュリティで保護されたエンクレーブを持つAlways Encryptedを有効に設定する必要があります。</target>
         <note></note>
       </trans-unit>
       <trans-unit id="SqlCmdExitOnError">
@@ -6552,18 +6552,18 @@ The Query Processor estimates that implementing the following index could improv
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol">
         <source>Attestation URL cannot be empty with the selected value of Attestation protocol.</source>
-        <target state="new">Attestation URL cannot be empty with the selected value of Attestation protocol.</target>
+        <target state="translated">構成証明の URL を、構成証明プロトコルの選択された値と共に空にすることはできません。</target>
         <note></note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidSecureEnclaves">
         <source>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</source>
-        <target state="new">Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</target>
+        <target state="translated">セキュリティで保護されたエンクレーブの値 '{0}' が無効です。有効な値は 'Enabled' と 'Disabled' です。</target>
         <note>.
  Parameters: 0 - secureEnclaves (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl">
         <source>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</source>
-        <target state="new">The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</target>
+        <target state="translated">構成証明 URL を構成証明プロトコル 'None' で指定することはできません。適切な構成証明プロトコルを設定するか、接続プロパティから構成証明 URL を削除します。</target>
         <note></note>
       </trans-unit>
       <trans-unit id="DefaultLanguagePlaceholder">
@@ -6584,7 +6584,7 @@ The Query Processor estimates that implementing the following index could improv
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves">
         <source>Attestation protocol cannot be empty with Secure enclaves enabled.</source>
-        <target state="new">Attestation protocol cannot be empty with Secure enclaves enabled.</target>
+        <target state="translated">セキュア エンクレーブを有効にした状態で構成証明プロトコルを空にすることはできません。</target>
         <note></note>
       </trans-unit>
     </body>

src/Microsoft.SqlTools.ServiceLayer/Localization/transXliff/sr.ko.xlf

@@ -2043,13 +2043,13 @@
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol">
         <source>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</source>
-        <target state="new">Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</target>
+        <target state="translated">증명 프로토콜에 대한 '{0}' 값이 잘못되었습니다. 유효한 값은 'AAS', 'HGS', 'None'입니다.</target>
         <note>.
  Parameters: 0 - enclaveAttestationProtocol (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination">
         <source>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</source>
-        <target state="new">The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</target>
+        <target state="translated">증명 프로토콜 및 증명 URL을 사용하려면 보안 enclave를 사용하는 Always Encrypted를 사용으로 설정해야 합니다.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="SqlCmdExitOnError">
@@ -6552,18 +6552,18 @@ The Query Processor estimates that implementing the following index could improv
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol">
         <source>Attestation URL cannot be empty with the selected value of Attestation protocol.</source>
-        <target state="new">Attestation URL cannot be empty with the selected value of Attestation protocol.</target>
+        <target state="translated">증명 URL은 증명 프로토콜의 선택된 값으로 비워 둘 수 없습니다.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidSecureEnclaves">
         <source>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</source>
-        <target state="new">Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</target>
+        <target state="translated">보안 Enclaves에 대한 '{0}' 값이 잘못되었습니다. 유효한 값은 '사용' 및 '사용 안 함'입니다.</target>
         <note>.
  Parameters: 0 - secureEnclaves (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl">
         <source>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</source>
-        <target state="new">The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</target>
+        <target state="translated">증명 URL은 증명 프로토콜 'None'으로 지정될 수 없습니다. 적절한 증명 프로토콜을 설정하거나 연결 속성에서 증명 URL을 제거하세요.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="DefaultLanguagePlaceholder">
@@ -6584,7 +6584,7 @@ The Query Processor estimates that implementing the following index could improv
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves">
         <source>Attestation protocol cannot be empty with Secure enclaves enabled.</source>
-        <target state="new">Attestation protocol cannot be empty with Secure enclaves enabled.</target>
+        <target state="translated">보안 enclave를 사용하도록 설정한 상태에서는 증명 프로토콜을 비워 둘 수 없습니다.</target>
         <note></note>
       </trans-unit>
     </body>

src/Microsoft.SqlTools.ServiceLayer/Localization/transXliff/sr.pt-br.xlf

@@ -2043,13 +2043,13 @@
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol">
         <source>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</source>
-        <target state="new">Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</target>
+        <target state="translated">Valor inválido '{0}' do protocolo de atestado. Os valores válidos são 'AAS', 'HGS' e 'None'.</target>
         <note>.
  Parameters: 0 - enclaveAttestationProtocol (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination">
         <source>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</source>
-        <target state="new">The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</target>
+        <target state="translated">O protocolo de Atestado e a URL de Atestado exigem que o Always Encrypted com enclaves seguros seja definido como Habilitado.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="SqlCmdExitOnError">
@@ -6552,18 +6552,18 @@ O Processador de Consultas estima que a implementação do índice a seguir pode
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol">
         <source>Attestation URL cannot be empty with the selected value of Attestation protocol.</source>
-        <target state="new">Attestation URL cannot be empty with the selected value of Attestation protocol.</target>
+        <target state="translated">A URL de Atestado não pode ficar vazia com o valor selecionado do Protocolo de Atestado.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidSecureEnclaves">
         <source>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</source>
-        <target state="new">Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</target>
+        <target state="translated">Valor inválido '{0}' dos enclaves seguros. Os valores válidos são 'Enabled' e 'Disabled'.</target>
         <note>.
  Parameters: 0 - secureEnclaves (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl">
         <source>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</source>
-        <target state="new">The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</target>
+        <target state="translated">A URL de Atestado não deve ser especificada com o protocolo de Atestado 'None'. Defina o protocolo de Atestado apropriado ou remova a URL de Atestado das propriedades de conexão.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="DefaultLanguagePlaceholder">
@@ -6584,7 +6584,7 @@ O Processador de Consultas estima que a implementação do índice a seguir pode
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves">
         <source>Attestation protocol cannot be empty with Secure enclaves enabled.</source>
-        <target state="new">Attestation protocol cannot be empty with Secure enclaves enabled.</target>
+        <target state="translated">O Protocolo de Atestado não pode ficar vazio com enclaves seguros ativados.</target>
         <note></note>
       </trans-unit>
     </body>

src/Microsoft.SqlTools.ServiceLayer/Localization/transXliff/sr.ru.xlf

@@ -2043,13 +2043,13 @@
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol">
         <source>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</source>
-        <target state="new">Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</target>
+        <target state="translated">Недопустимое значение "{0}" для протокола аттестации. Допустимые значения: "AAS", "HGS" и "None" (Нет).</target>
         <note>.
  Parameters: 0 - enclaveAttestationProtocol (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination">
         <source>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</source>
-        <target state="new">The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</target>
+        <target state="translated">Протокол аттестации и URL-адрес аттестации требуют включения Always Encrypted с безопасными анклавами.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="SqlCmdExitOnError">
@@ -6552,18 +6552,18 @@ The Query Processor estimates that implementing the following index could improv
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol">
         <source>Attestation URL cannot be empty with the selected value of Attestation protocol.</source>
-        <target state="new">Attestation URL cannot be empty with the selected value of Attestation protocol.</target>
+        <target state="translated">URL-адрес аттестации не может быть пустым с выбранным значением протокола аттестации.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidSecureEnclaves">
         <source>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</source>
-        <target state="new">Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</target>
+        <target state="translated">Недопустимое значение "{0}" для безопасных анклавов. Допустимые значения: "Enabled" (Включено) и "Disabled" (Отключено).</target>
         <note>.
  Parameters: 0 - secureEnclaves (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl">
         <source>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</source>
-        <target state="new">The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</target>
+        <target state="translated">Недопустимо задавать URL-адрес аттестации с протоколом аттестации "None". Настройте подходящий протокол или удалите URL-адрес из свойств подключения.</target>
         <note></note>
       </trans-unit>
       <trans-unit id="DefaultLanguagePlaceholder">
@@ -6584,7 +6584,7 @@ The Query Processor estimates that implementing the following index could improv
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves">
         <source>Attestation protocol cannot be empty with Secure enclaves enabled.</source>
-        <target state="new">Attestation protocol cannot be empty with Secure enclaves enabled.</target>
+        <target state="translated">Протокол аттестации не может быть пустым, если включены безопасные анклавы.</target>
         <note></note>
       </trans-unit>
     </body>

src/Microsoft.SqlTools.ServiceLayer/Localization/transXliff/sr.zh-hans.xlf

@@ -2043,13 +2043,13 @@
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol">
         <source>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</source>
-        <target state="new">Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</target>
+        <target state="translated">Attestation 协议的值“{0}”无效。有效值为“AAS”，“HGS”和“None”。</target>
         <note>.
  Parameters: 0 - enclaveAttestationProtocol (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination">
         <source>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</source>
-        <target state="new">The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</target>
+        <target state="translated">证明协议和证明 URL 要求启用具有安全隔离区的始终加密。</target>
         <note></note>
       </trans-unit>
       <trans-unit id="SqlCmdExitOnError">
@@ -6552,18 +6552,18 @@ The Query Processor estimates that implementing the following index could improv
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol">
         <source>Attestation URL cannot be empty with the selected value of Attestation protocol.</source>
-        <target state="new">Attestation URL cannot be empty with the selected value of Attestation protocol.</target>
+        <target state="translated">证明 URL 不能为空，且所选值为证明协议。</target>
         <note></note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidSecureEnclaves">
         <source>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</source>
-        <target state="new">Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</target>
+        <target state="translated">Secure enclave 的值“{0}”无效。有效值为“已启用”和“已禁用”。</target>
         <note>.
  Parameters: 0 - secureEnclaves (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl">
         <source>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</source>
-        <target state="new">The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</target>
+        <target state="translated">证明 URL 不能使用“无”的证明协议指定。请设置适当的证明协议或从连接属性中删除证明 URL。</target>
         <note></note>
       </trans-unit>
       <trans-unit id="DefaultLanguagePlaceholder">
@@ -6584,7 +6584,7 @@ The Query Processor estimates that implementing the following index could improv
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves">
         <source>Attestation protocol cannot be empty with Secure enclaves enabled.</source>
-        <target state="new">Attestation protocol cannot be empty with Secure enclaves enabled.</target>
+        <target state="translated">证明协议不能为空且已启用安全 enclave。</target>
         <note></note>
       </trans-unit>
     </body>

src/Microsoft.SqlTools.ServiceLayer/Localization/transXliff/sr.zh-hant.xlf

@@ -2043,13 +2043,13 @@
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidEnclaveAttestationProtocol">
         <source>Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</source>
-        <target state="new">Invalid value '{0}' for Attestation protocol. Valid values are 'AAS', 'HGS' and 'None'.</target>
+        <target state="translated">證明通訊協定的無效值 '{0}'。有效的值為 'AAS'、'HGS' 及 [無]。</target>
         <note>.
  Parameters: 0 - enclaveAttestationProtocol (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAlwaysEncryptedOptionCombination">
         <source>The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</source>
-        <target state="new">The Attestation protocol and Attestation URL requires Always Encrypted with Secure enclaves to be set to Enabled.</target>
+        <target state="translated">證明通訊協定與證明 URL 需要將具有安全記憶體保護區的 Always Encrypted 設定為 [已啟用]。</target>
         <note></note>
       </trans-unit>
       <trans-unit id="SqlCmdExitOnError">
@@ -6552,18 +6552,18 @@ The Query Processor estimates that implementing the following index could improv
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationUrlWithAttestationProtocol">
         <source>Attestation URL cannot be empty with the selected value of Attestation protocol.</source>
-        <target state="new">Attestation URL cannot be empty with the selected value of Attestation protocol.</target>
+        <target state="translated">具有證明通訊協定的選取值時，證明 URL 不可為空白。</target>
         <note></note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidSecureEnclaves">
         <source>Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</source>
-        <target state="new">Invalid value '{0}' for Secure enclaves. Valid values are 'Enabled' and 'Disabled'.</target>
+        <target state="translated">安全記憶體保護區的無效值 '{0}'。有效的值為 [已啟用] 和 [已停用]。</target>
         <note>.
  Parameters: 0 - secureEnclaves (string) </note>
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringInvalidAttestationProtocolNoneWithUrl">
         <source>The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</source>
-        <target state="new">The Attestation URL must not be specified with Attestation protocol 'None'. Either set appropriate Attestation protocol or remove Attestation URL from connection properties.</target>
+        <target state="translated">無法在證明通訊協定為 [無] 的情況下指定證明 URL。請設定適當的證明通訊協定，或從連線屬性移除證明 URL。</target>
         <note></note>
       </trans-unit>
       <trans-unit id="DefaultLanguagePlaceholder">
@@ -6584,7 +6584,7 @@ The Query Processor estimates that implementing the following index could improv
       </trans-unit>
       <trans-unit id="ConnectionServiceConnStringMissingAttestationProtocolWithSecureEnclaves">
         <source>Attestation protocol cannot be empty with Secure enclaves enabled.</source>
-        <target state="new">Attestation protocol cannot be empty with Secure enclaves enabled.</target>
+        <target state="translated">安全記憶體保護區啟用時，證明通訊協定不可為空白。</target>
         <note></note>
       </trans-unit>
     </body>